Thanks for taking the time to check out this 2007 Freightliner M2, equipped with factory 4WD, spring ride, air brakes, 36,000GVWR. Powered by a C7 Cat Diesel rated at 250HP, mated to a six speed manual transmission. Showing just under 243k Miles at the time of this writing.

Very well equipped service truck, with a 14′ IMT Dominator bed, 10,500# crane, hydraulic compressor, product tanks, two sets of drawers, bolt drawers, and more.

This truck has been fully serviced, VA state safety inspected, all of the equipment has been tested and works as it should – turnkey service truck ready to go to work, in a hard to find factory 4×4 configuration in a class 7 chassis! Work just performed includes:

Oil change, new fuel filters, new blower motor, new rear brake shoes, new tires (all six), new tie rod ends, new rear dog bone bushings, new rear differential, new rear u joints, new oil cooler gaskets, new block heater, new rear seal on trans, new transfer case seal, new front brake shoes, new chrome front bumper, some misc. lights replaced, and a front end alignment.

We spare no expense in making sure every truck we sell is ready to work and needs nothing – we use all OEM parts, anything we find that needs addressed we fix. I can provide copies of receipts for all parts and labor.

The bed is a 2007 (same year) IMT DOM1S2, 14′ IMT service bed, in great shape. All latches close, latch, lock, and seal as they should. All latches are keyed the same, both sides of the bed can also be locked with the master lock system.

The bed shows like new – the exterior has been professionally sandblasted and repainted, with new bedliner applied on bin fronts, on the bumper and outriggers, and inside of the bed. No chips or scratches present.

D1 and D2 compartments are equipped with full sets of IMT factory drawers, about 3/4 the height of the compartment, so pretty large drawer sets. D3 compartment has a Vanair super boost jump pack, with cables. Driver wheel well compartment has one long shelf. Driver rear compartment has two shelves.

Large work bench rear bumper with pass through bins, hydraulic outriggers, tow hitch receiver, and a flip up gooseneck ball inside of the bumper as well. Working Wilton Vise.

Inside of the bed there is a three section product tank, complete with reels and dispensers.

The crane compartment houses a reelcraft hosereel, body control panel (for lights, and outrigger controls), a wireless crane remote, and air regulator/dryer.

Passenger wheel well compartment has a complete set of bolt drawers. P3 compartment has three shelves. P2 compartment (taller, torch cabinet height) has three more shelves. And the P1 compartment is split with three shelves on the left, and torch bottle racks on the right.

The crane is an IMT 6025, fully hydraulic and PTO driven crane, capable of 10,500# maximum lifting capacity and a two stage hydraulic extension out to 25′ 4″. The crane is run off an aftermarket wireless remote, and is fully proportional with excellent speed control.

The compressor is an IMT PTO driven compressor, builds air as it should.

If you have any questions, feel free to call or text 804-716-8487.

This truck is offered for sale by Truck World RVA in Oilville VA. All trucks are offered on a first come first serve basis – so please call ahead to confirm availability.

Thanks for taking the time to check this one out. If you have any questions, call or text anytime at 804-716-8487.